The types of wall putty you choose for your project are determined by the type of surface you are applying it to. Wall putty is white cement powder adhesive that can be used to fill gaps and seal cracks in walls to make them smooth and ready for paint applications.
Wall care putty can be made of cement or acrylic materials. Cement wall putty is often used on masonry surfaces and when there are large gaps in between joints due to poor construction practices. Acrylic wall putty is often more expensive but it lasts longer than cement types because it resists water damage better.
Also read: What is wall putty?
Types of Wall Putty
Wall putty types include cement types and acrylic types, which are determined by the type of surface you're applying them to.
Cement Wall Putty:
This type of wall putty is made out of cement and will typically be used in masonry types of surfaces. The white cement wall putty is used to make the wall surface smooth by filling the cracks and holes. However, it can also be applied on plastered walls to make them paint ready, to fill dents and imperfections, level a primed wall, and even on wood and metallic surfaces.
Nerolac Cement Putty is made to resist water damage and is a good choice for areas that are prone to moisture, including interiors of a building. It provides superior smoothness, excellent water repellency, doesn't flake, and prevents cracking.
Acrylic Wall Putty:
Acrylic types of wall putty are more expensive than cement types but they last longer because the acrylic allows it to resist water damage better. Acrylic types can be used on both plaster and masonry surfaces, and this type will provide a smooth finish that is paintable,including exteriors and interiors of a building.
Nerolac Acrylic Wall Putty is resistant to water damage and provides excellent smoothness, paintability, doesn't flake or crack. Its biggest benefit is that it offers excellent filling and only takes 30 minutes to dry, a lot faster than cement wall putty, which can take anywhere from 6-7 hours.
Acrylic Wall Putty vs Cement Wall Putty
The types of wall putty you choose for your project are determined by the type of surface you're applying it to. Both cement and acrylic wall putty types are available, with cement types being more commonly used on masonry surfaces and acrylic types being more popular for interior walls.
Also read: How to apply wall putty? and what is the difference between wall putty and white cement?
They both are distinct in terms of features, composition, application, and usages. The following table summarises them:
Brief comparison points
| Attributes | Cement Wall Putty | Acrylic Wall Putty |
|---|
| Features and Benefits | - Superior smoothness
- Water repellent
- No flaking
- Reduces cracking
- No primer needed
| - No curing required
- Ideal for old/new wals
- Excellent bonding
- No foul smell
- Smooth finish
|
| Technical Data | Drying Time: Min 3 hours Coverage: 1.86-2.32 sq.m/L/Coat | Drying Time: 30 minutes Finish: Matte |
| Recommended Usage | - Ideal for interiors
- Filling of dents
- Leveling of primed walls
- Wood and metal
| - Both exteriors and interiors
- Concrete and mortar surfaces
|
| Recommended System of Application | - Step 1: Primer
- Step 2: Cement Putty
- Step 3: Primer
- Step 4: Finishing Coat
| - Step 1: Acrylic Putty
- Step 2: Primer
- Step 3: Finishing Coat
|
Types of Wall Putty Conclusion
If you are looking to buy the best type of wall putty for your walls, you can choose from the two best options - Nerolac Acrylic Wall Putty and Nerolac Cement Wall Putty. They are ideal for both your home renovation projects as well as for revamping wall paint for your commercial space.
FAQs
Types of Wall Putty Conclusion
Which type of wall putty is best? ›
Acrylic and water-based, acrylic putty is perfect for applying on interior walls. It has long-lasting properties and a smooth texture that make it a preferable option when compared to POP. The walls are given a polished and impressive finish if you use good quality putty.
What are the two types of putty? ›
Both cement and acrylic wall putty types are available, with cement types being more commonly used on masonry surfaces and acrylic types being more popular for interior walls.
What is the difference between normal wall putty and waterproof wall putty? ›
What is the difference between normal cement-based putty and Birla White WallSeal Waterproof Putty? Birla White WallSeal Waterproof Putty is highly water resistant. It is 2 times more resistant than any normal cement-based putty and provides better protection from seepages in wall.
Which putty is best acrylic or cement? ›
Which Putty Best Suits Your Home?
| Acrylic Putty | White Cement Based Putty |
|---|
| Durability: Better than POP but begins to wear off and cause peeling and flaking of paint material after some time. | Durability: It is stronger and highly durable due to superior binding properties. |
4 more rowsNerolac Cement Putty is made to resist water damage and is a good choice for areas that are prone to moisture, including interiors of a building. It provides superior smoothness, excellent water repellency, doesn't flake, and prevents cracking.
Which waterproof putty is best for exterior walls? ›
Just like Birla, JK cement too has its range of waterproof wall putty. It is sold under the name of JK Cement Shieldmaxx. It contains SiH4 molecules. The formula used in this wall putty keeps walls from dampening and it can be used in the interior and exterior of your house.
What is a good substitute for wall putty? ›
If you do not want to deal with the primer, you can use white cement. Through its structure, it provides you coarse finish compared with the wall putty. If you want to present quality work by spending much more time, white cement might be a better choice for you.
What is wall putty called in the USA? ›
Wall putty is a generic term. P.O.P is named so because it is derived mostly from Paris and invented in Egypt. Types of wall putty are coarse putty and fine putty. P.O.P comes in types like Gypsum, cement plaster and lime plaster.
Which is better, wall putty or white cement? ›
I would say choosing between white cement vs wall putty depends on the specific requirements of the project. If you are looking for a smoother finish and want to fill cracks or imperfections, wall putty is a suitable choice. It provides a strong base for paint and enhances the overall aesthetics of the wall.
Generally, professional painters apply two coats of Indigo wall putty before painting any surface. The first coat fills in the imperfections and the second coat ensures that the coated surface and the wall are in one line with each other. You can use the putty over dry walls.
What is the rate of Nerolac putty 40KG? ›
NEROLAC PUTTY 40KG MRP-750/BAGS at Rs 750/bag | Nerolac Putty in Chhindwara | ID: 22431487473.
Does wall putty need water? ›
Cement Wall Putty:
They are available in powder form and need to be mixed with water before use. The consistency should be that of peanut butter (i.e., not too runny or overly thick). You will then need to apply it with a putty knife and let it dry for about a day before painting the wall.
Which paint is best for wall putty? ›
Asian Paints is a well-known brand that offers high-quality wall putty trusted by many professionals. Berger Paints is another reputable brand, and its Bison Wall Putty is a popular choice for both interior and exterior applications. JK White Cement is known for its quality products, and WallMaxX is no exception.
When to use acrylic wall putty? ›
This wall putty can be applied to interior walls and wooden surfaces. The putty can be used on plastered walls, concrete, brickwork, and asbestos. Since it is an undercoat, acrylic putty is available only in white shade. Acrylic putty smoothens and levels the bare walls by covering their cracks and dents.
What is the best color for putty? ›
Due to its versatility and ease of concealment by almost any paint colour, white wall putty is considered as the best colour for wall putty. It offers a neutral foundation and aids in masking wall surface flaws.
What is the difference between wall putty and wall filler? ›
Fillers and putty are DIY products which are used to remove unevenness from surfaces. The fillers are generally used to fill gaps and holes in walls and wood (often decayed wood). Putty is used to smooth relatively small uneven surfaces caused by screw holes, scratches or coarse materials.
Is acrylic wall putty good? ›
A great advantage of using acrylic wall putty for all kinds of different home renovation tasks is that it can save you a lot of money in the long term. It's an affordable solution that will get your walls fixed up fast - without any hassle or headache!
Which is better, wall putty or pop? ›
The advantage of wall putty is that it is water resistant preventing flaking away of paint even in the case of damp walls. P.O.P solves plaster surface and dry wall problems. Wall putty is used for filling of small cracks and maintaining walls. P.O.P is used for wall finish, castings and making decorative features.
