3 Tips for Making Your Best Fudge (2024)

Listen to This Article:

Loading the Elevenlabs Text to Speech AudioNative Player…

What’s not to love about fudge? It melts in your mouth, coating your tongue in rich and creamy sweetness.

However, making meltaway fudge isn’t always easy! If you don’t understand the proper techniques, you may end up with a grainy or crumbly rather than creamy confection.

If you want to get a better hold on making fudge, join us as we dive into some of the culinary science that pastry arts students can explore during their time at Escoffier.

How to Make Fudge

The simplest fudge recipes start with three ingredients found in many types of confections: sugar, butter, and milk. However, some recipes contain variations on these ingredients, like swapping sweetened condensed milk for the milk and sugar, or semi-sweet chocolate chips for some of the sugar.

Many types of fudge also contain additional ingredients like chocolate, vanilla, or maple syrup, as well as mix-ins such as nuts and marshmallows.

No matter the exact ingredients you use, the fudge-making process will be similar. First, you’ll heat the ingredients to dissolve the sugar and create a hom*ogenous mixture. Next, you’ll cook the mixture until it thickens. Finally, you’ll remove the fudge from the heat, allow it to cool, and then mix thoroughly.

Tips for Making Fudge

Smooth, creamy, and decadent fudge relies on proper technique, so keep these tips in mind when whipping up your next batch.

1. Monitor the Temperature with a Candy Thermometer

If you end up with soft fudge that turns into a puddle in your hands or hard fudge that is a bit reminiscent of a crunchy candy, improper temperature is likely to blame. If you don’t heat your fudge to a high enough temperature, you’ll end up with a soft product. And if you heat the mixture too much, your fudge may be harder than you’d like.

When you’re cooking your fudge over the stove, you should aim for a maximum temperature between 234-237ºF. Yes, that’s only a three-degree range! In order to ensure you remove your fudge from the heat as soon as it reaches this temperature, you should monitor the mixture with a candy thermometer.

2. Avoid Stirring Once the Mixture Comes to a Simmer

Another key part of a successful fudge texture is when you stir the mixture. Stirring the sugar and milk during the initial stages of cooking allows the sugar to dissolve. However, once the mixture comes to a boil, it’s time to put the spoon down.

If you continue stirring once the mixture is simmering, you are encouraging the development of sugar crystals. While crystallization is the goal if you’re making hard candy, crunchy sugar bits can quickly ruin a fudge’s silky smooth texture.

3. Beat Thoroughly

While you shouldn’t mix the fudge mixture when it’s hot, you should beat the mixture once it has been removed from the heat and cooled.

Once again, turn to your candy thermometer. When the mixture has cooled to 110ºF (but not a moment before), it’s time to pick up a wooden spoon and begin stirring. Continue mixing the fudge until it has lost most of its sheen, about 5–10 minutes.

If you mix the fudge when it’s too hot, the sugar particles may lump together and form discernable crystals. Therefore, monitoring the temperature is key!

3 Tips for Making Your Best Fudge (1)

Proper technique is an essential part of creating silky smooth fudge.

Chocolate Fudge Recipe

Keep the previous fudge tips in mind as you follow this recipe for chocolate fudge.

Ingredients

  • 28 oz granulated sugar
  • 12 oz whole milk
  • 6 oz corn syrup
  • 4 oz butter
  • 5 oz unsweetened chocolate
  • ¼ tsp salt
  • 1 tbsp vanilla

Directions

  1. Prepare an 8×8 pan by lining it with butter-coated parchment paper or aluminum foil.
  2. Place the sugar, milk, and corn syrup in a medium saucepan and stir well. Once the mixture begins to boil, stop stirring. Monitor the mixture and watch for it to reach 230ºF.
  3. Add the butter, chocolate, salt, and vanilla and bring the temperature up to 235ºF. Remove from heat.
  4. Once the mixture has cooled to 110ºF, mix it with a wooden spoon until it loses the majority of its sheen.
  5. Pour the mixture into the prepared pan and let it cool fully before slicing.

Continue Improving Your Pastry Skills

Now that you know some of the tips for making fudge, it’s time to think about what other confections and baked goods you’d like to create! Whether you want to make a chewy yet tender loaf of bread or decorate a cake with smooth fondant and intricately piped roses, understanding the technique behind successful dishes is key.

Pastry school can introduce you to both the science and art involved in creating some of your favorite sweet treats and savory baked goods. By working with talented chef instructors, you can explore inside tricks and tips and receive individualized feedback as you practice creating new dishes.

By the time students graduate from , many find they are ready to move toward career goals like starting a bakery or beginning a career as a cake decorator. If you’d like to take the next step to accomplish your pastry dreams, contact us for more information.

To learn more about baking & pastry, check these out next:

  • Cake Decorating Tips: How to Choose the Right Pastry Bag
  • What Is It Like to Be a Pastry Chef?
  • 6 Advanced Baking Techniques Every Pastry Chef Should Know

This article was originally published on December 25, 2016, and has since been updated.

*Information may not reflect every student’s experience. Results and outcomes may be based on several factors such as geographical region or previous experience.

3 Tips for Making Your Best Fudge (2024)

FAQs

Why is my 3 ingredient fudge not setting? ›

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

What is the key to successful non grainy fudge? ›

The key to successful, nongrainy fudge is in the cooling, not the cooking. The recipe calls for heating the ingredients to the soft-ball stage, or 234° F, then allowing it to cool undisturbed to approximately 110° F.

How do you know if fudge is thick enough? ›

Use a candy thermometer or conduct a cold water test to check if the fudge is done. Do not rely on the cooking time indicated in your recipe. The fudge is ready when a candy thermometer reads between 112°C to 114°C (234°F to 237°F) or the mixture forms a soft ball in cold water.

How to make fudge creamy and not grainy? ›

By cooling the fudge prior to agitation (like in the recipes included in this article), on the other hand, you'll get much smaller, finer sugar crystals and a finished fudge with a smooth, creamy texture. Cool the mixture until it reads 120° F on the thermometer—no stirring. This can take 1 to 1/2 hours.

How do you harden fudge that is too soft? ›

How do you fix fudge that is too soft? Bring the fudge back to a boil with 1–2 US tbsp (15–30 ml) of cream. If your fudge is soft or runny, it probably didn't come up to a high enough temperature while it was cooking. Put it back into the saucepan and add 1–2 US tbsp (15–30 ml) of 35% fat whipping cream.

What is the best temperature to cook fudge? ›

Add the butter, chocolate, salt, and vanilla and bring the temperature up to 235ºF. Remove from heat. Once the mixture has cooled to 110ºF, mix it with a wooden spoon until it loses the majority of its sheen. Pour the mixture into the prepared pan and let it cool fully before slicing.

How do you beat fudge? ›

When the fudge cools to 110 degrees F/43 degrees C, beat the mixture vigorously with a wooden spoon until it's no longer glossy. Then you can stir in the nuts, or any other extra flavorings, and transfer it to the cooling pan. Adding Butter to Fudge | Photo by Meredith.

How long to boil fudge to soft ball stage? ›

How long does it take to make fudge:
  1. about 18 min to reach boiling.
  2. about 40 minutes to reach soft ball stage.
  3. 60 minutes to cool.
  4. 28 minutes to beat in a KitchenAid (your time for this may vary)
  5. 4 hours to set.

What happens if you boil fudge too long? ›

The amount of time you cook fudge directly affects its firmness. Too little time and the water won't evaporate, causing the fudge to be soft. Conversely, cook it too long and fudge won't contain enough water, making it hard with a dry, crumbly texture.

What consistency should fudge be before it sets? ›

You know it's ready when a small amount of the mixture dropped into a glass of cold water sets into a soft ball that you can lift out with a teaspoon and pinch between your fingers. Turn off the heat and keep stirring for 5 minutes or until the mix starts to thicken a little.

How to fix failed fudge? ›

Fixing Fudge
  1. Scrape the fudge back into a large saucepan and add 1 1/2 cups of water.
  2. Stir the fudge over low heat until it dissolves. ...
  3. Increase the heat to medium and bring it to a boil, washing down the sides of the pan frequently with a wet pastry brush to prevent sugar crystals from forming.
Jan 5, 2020

What is the secret to good fudge? ›

The key to making amazing fudge is in the manipulation of sugar crystals as they heat up and cool down. The unique texture of fudge comes from sugar crystals — very, very small “microcrystals” that form as sugar goes from solid to liquid (molten liquid, at that) and then back to solid again.

What is the soft ball test for fudge? ›

The cold-water test for soft ball stage is this: Fill a cup with very cold water. Spoon a small amount of the boiling candy mixture into the cold water. If the syrup forms a soft ball in the water that flattens when removed, it is at soft-ball stage.

How long to leave fudge to set? ›

Pour Fudge into Prepared Pan

Once the fudge has thickened and the nuts are added, pour the fudge into the prepared pan. Allow it to set at room temperature until firm, about three hours or overnight.

Should you stir fudge while it's cooking? ›

Don't stir!

Once the fudge reaches soft-ball stage on the candy thermometer, remove from the heat and let the temperature drop to 110°F. Keep that spoon or spatula out of the pot until this happens. If you stir too early in the process, you'll make the sugar crystals too big and end up with grainy fudge.

What does cream of tartar do in fudge? ›

Cream of tartar is used in caramel sauces and fudge to help prevent the sugar from crystallizing while cooking. It also prevents cooling sugars from forming brittle crystals, this is why it's the secret ingredient in snickerdoodles!

Why hasn't my fudge set properly? ›

The most common culprit behind unset fudge is inaccurate temperature control. If the sugar mixture hasn't reached the correct temperature, your fudge won't set. Ensure you use a reliable candy thermometer and follow temperature guidelines meticulously to achieve the desired consistency.

Top Articles
Latest Posts
Article information

Author: Domingo Moore

Last Updated:

Views: 6416

Rating: 4.2 / 5 (73 voted)

Reviews: 88% of readers found this page helpful

Author information

Name: Domingo Moore

Birthday: 1997-05-20

Address: 6485 Kohler Route, Antonioton, VT 77375-0299

Phone: +3213869077934

Job: Sales Analyst

Hobby: Kayaking, Roller skating, Cabaret, Rugby, Homebrewing, Creative writing, amateur radio

Introduction: My name is Domingo Moore, I am a attractive, gorgeous, funny, jolly, spotless, nice, fantastic person who loves writing and wants to share my knowledge and understanding with you.